48 USER MANUAL ME-01
Weighing results and data transmission from scale to computer or to printer
To fully use database capabilities other options must also be used: SeriaL, LabeL (for label printer) and
Print.
Serial option enables to select proper transmission protocol for each port. Thereby label printer can work
independently. Recalling product is equivalent with choosing corresponding label number. If database is
not used, proper label can be choosed using LabeL option.
To each weighing results transmission a set of product and user identification data is added. The set is
activated in Print option.
Available data from products and users base (Print / SEtuP option):
- USEr Id – user identification number,
- USEr nA – user name (inscribed from PC or scanner).
- Prod Id – product identification number,
- Prod bA – product barcode (inscribed or scan),
- Prod nA – product name (inscribed from PC or scan),
- Label – label number for proper product,
- APW – unitary mass (PCS function),
- tArE – tare,
- totAL – total mass (totAL function).
To Next Page
Loading...
