Axon Fleet 3 Installation Guide
Axon Enterprise, Inc. Page 6 of 47
Pre-Installation Information
This section provides information about available Axon Fleet 3 packages, along with
requirements, wiring information, tools, and supplies needed for installation. It also includes
information on upgrading to Axon Fleet 3 from Axon Fleet 1 and 2.
Prior to Fleet 3 equipment populating in Axon Evidence, the system must be locally powered
on and registered to an active agency instance of Axon Evidence. In doing so, the Fleet Hub
will become an assignable device in the Vehicle Creation process in Axon Evidence >
Inventory > Vehicles > Guided Vehicle Creation.
Packages and Parts
Information about the standard Axon Fleet 3 hardware kit is provided in this section.
Fleet 3 Hardware Package
The Fleet 3 components necessary to install one vehicle can be shipped in a single box. The
following table lists the components for a standard two-camera vehicle installation.
Part Count SKU Image
Hub 1 72010
Dual-View Camera
1 72000
To Next Page
Loading...
