Azbil C15 User Manual

6-25
Chapter 6. SETTINGS DURING OPERATION

Key lock setup
(1) In the operation display mode, keep the [para] key
pressed for 2 s or longer.
>> The unit then enters the parameter setting mode.
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
(2) In the parameter setting display mode, keep the
[para] key pressed for 2 s or longer.
>> The display is then changed to the setup setting
display.
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
(3) Press the [para] key several times.
>> Display the setup setting [Key lock].
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
(4) Press the [<], [
<
], or [
<
] key to select the set value in
[LOC] from the following:
0: All settings are possible.
1: Mode, event, operation display, SP, UF, lock, manual MV, and mode key
can be set.
2: Operation display, SP, UF, lock, manual MV, and mode key can be set.
3: UF, lock, manual MV, and mode key can be set.
>> When no keys are pressed for 2 s or longer, the flashing of the numeric
value is stopped to set the currently displayed value.
(5) Press the [mode] key.
>> The display is returned to the operation display.
Handling Precautions
When two sets of passwords (1A and 1B, 2A and 2B) are met, the set value
can be changed.

Azbil C15 Specifications

General

Brand	Azbil
Model	C15
Category	Controller
Language	English