Azbil C15 User Manual

6-27
Chapter 6. SETTINGS DURING OPERATION

Password display setup
(1) In the operation display mode, keep the [para] key
pressed for 2 s or longer.
>> The unit then enters the parameter setting mode.
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
(2) In the parameter setting display mode, keep the
[para] key pressed for 2 s or longer.
>> The display is then changed to the setup setting
display.
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
(3) Press the [para] key several times.
>> Display the setup setting [PASS: Password
display].
rdy
man
ev1 ev2 ev3 ot1 ot2
para
mode
pv
sp
(4) Press the [<], [
<
], or [
<
] key to change the set value
in [PASS].
Setting range: 0 to 15
When “5” is set, the passwords 1A to 2B can be displayed. When the power is
turned ON, the setting is returned to “0”.
>> When no keys are pressed for 2 s or longer, the flashing of the numeric
value is stopped to set the currently displayed value.
(5) Press the [mode] key.
>> The display is returned to the operation display.
Handling Precautions
[PASS] limits to the conditions to display the passwords 1A, 2A, 1B and 2B,
in order to prevent incorrect password setting.

Azbil C15 Specifications

General

Brand	Azbil
Model	C15
Category	Controller
Language	English