Azbil C15 User Manual

7-10
Chapter 7. LIST OF SIMPLE CONFIGURATION DISPLAY ITEMS
Display Item Contents Initial value Notes
Internal Contact 2
Operation type
Same as Internal Contact 1
Operation type
0
Internal Contact 3
Operation type
Same as Internal Contact 1
Operation type
0
Key lock 0: All settings are enabled.
1: Mode, event, operation
display, SP, UF, lock, manual
MV, and mode key can be set.
2: Operation display, SP, UF, lock,
manual MV, and mode key
can be set.
3: UF, lock, manual MV, and
mode key can be set.
0 When two sets of passwords (1A
and 1B, and 2A and 2B) are met,
the settings can be made.
Mode key setting, MV setting
in the MANUAL mode, key lock,
password display, and password
1A to 2B settings can be made
when the key lock (LOC) is 0 to 3.
Password display 0 to 15
5: Password 1A, 2A, 1B and 2B
display
0 “0” is set whenever the power is
turned ON.
Password 1A 0000 to FFFF (hexadecimal value) 0000 Displayed when the password
display (PASS) is “5” and two sets
of passwords (1A and 1B, 2A and
2B) are met.
Password 2A 0000 to FFFF (hexadecimal value) 0000
Password 1B 0000 to FFFF (hexadecimal value) 0000 Displayed when the password
display (PASS) is “5”.
Password 2B 0000 to FFFF (hexadecimal value) 0000

Azbil C15 Specifications

General

Brand	Azbil
Model	C15
Category	Controller
Language	English