Aztech DSL600E User Manual

ADSL2+ Ethernet USB Combo Router – Easy Start
Chapter 3 – Configuring Your Ethernet Network Card
If your computer/notebook is connected to the Ethernet Port of the ADSL Router, proceed with
the following instructions. If your computer/notebook is connected to the USB Port of the ADSL
Router, proceed with Chapter 4.
The illustrated screen shots serve only as examples. For any dissimilarity, please follow the
instructions closely as prompted on your Computer.
NOTE: Proceed with this section ONLY if your computer/notebook is connected to
the Ethernet Port of your ADSL Router.
3.1 For Windows
®
98 Second Edition / Windows
®
Me
Proceed with the steps below.
1. From your Windows desktop, right-click on the Network Neighborhood icon. Select
Properties.
2. From the Configuration tab, select TCP/IP-> xxx where xxx refers to the model of your
Ethernet Card that is connected to your ADSL Router.
3. Click Properties as show below in Fig 1-14.
Figure 1-14 : Network settings
Page 16 of 42

Aztech DSL600E Specifications

General

Brand	Aztech
Model	DSL600E
Category	Network Router
Language	English