ADSL2+ Ethernet USB Combo Router – Easy Start
4.2 For Windows
®
ME
Proceed with the steps below:
1. Power ON your computer to start the Windows Operating System.
2. Place the Installation CD into your CD-ROM Drive.
3. At the following prompt, select Specify the location of the driver (Advanced) option
and click Next. See Fig 1-21.
Figure 1-21 : Specifying Driver Location
Page 21 of 42
4. Click Removable Media option and click Next. See Fig 1-22.
Figure 1-22 : Driver Location
To Next Page
Loading...
