ADSL2+ Ethernet USB Combo Router – Easy Start
Page 5 of 42
Chapter 1 – Introduction
Thank you for purchasing our ADSL2+ Ethernet USB Combo Router. The ADSL Router
provides you with a high-speed broadband Internet connection using your existing phone line
that at the same time allows you to make phone calls.
The ADSL Router can be connected to any computer/notebook with a USB Port (for Ethernet
USB Combo router only) or 10/100 Base-T Ethernet card. For multiple users connection, you
may connect your computers/notebooks to both the Ethernet Port and USB Port on the ADSL
Router at the same time or expand the Ethernet connection of the ADSL Router with an Ethernet
Hub / Switch.
This documentation assumes that you have already installed an Ethernet card on your
computer/notebook.
1.1 Minimum Requirements
• Pentium
®
MMX 233MHz
• A CD-ROM Drive
• Ethernet card installed with TCP/IP Protocol (required only if you are connecting
to the ETHERNET port of your ADSL Router)
• USB port (required if you are connecting to the USB Port of your ADSL Router,
for Ethernet USB Combo Router only)
• Host Operating Systems support for USB (For Ethernet USB Combo Router
only):
- Windows® 98 Second Edition
- Windows® Me
- Windows® 2000
- Windows® XP
- Windows® XP x64 Edition
- Macintosh OS 10.2 & above
• OS independent for Ethernet
• Web Browser support:
- Microsoft Internet Explorer 4.0 (or later versions)
- Netscape® Navigator 3.02 (or later versions)
To Next Page
Loading...
Need help?
General
