ADSL2+ Ethernet USB Combo Router – Easy Start
5. Click Next again to proceed installation with the indicated driver.
6. Click Finish to complete the USB driver installation.
7. Restart your system when prompted.
8. Proceed to Chapter 5.
4.3 For Windows
®
2000
Proceed with the steps below:
1. Power ON your computer to start the Windows Operating System.
2. Place the Installation CD into your CD-ROM Drive.
3. At the prompt shown in Fig 1-23, click Next.
Figure 1-23 : Hardware wizard
4. Select Search for a suitable driver for my device (recommended) option and click
Next. See Fig 1-24.
Figure 1-24 : Search Driver
Page 22 of 42
To Next Page
Loading...
Need help?
General
