Aztech DSL600E User Manual

ADSL2+ Ethernet USB Combo Router – Easy Start
Chapter 6 – Router Setup Utility
(For Windows 98 SE/ ME/ 2000/ XP Users ONLY)
NOTE: This chapter is for Windows User only. Please use the Setup Utility
Installation CD provided to setup the USB driver and Internet connection.
For Windows 98 SE user, you may be prompted for your Windows CD-
ROM during installation. At the prompt, replace the Installation CD in
your CD-ROM Drive with your Windows CD-ROM and click OK.
6.1 Running Setup Utility
Insert the Setup Utility CD into the CD-ROM drive. The utility will auto-run and the screen as
shown below will appear. (Note: If it does not auto-run, access to the CD-ROM drive and
execute Setup.exe). Pictures of different router models will appear when you position the mouse
cursor over the available options. Depending on your model, select ADSL2+ Ethernet Modem
or ADSL2+ Ethernet USB Router to begin setup. See Fig 1-37.
Figure 1-37 : Setup Utility – Select Router Model
NOTE: Do not plug in your USB cable before running the setup utility. Plug in
only when prompt to do so. Otherwise connect the Ethernet cable before
proceeding.
Page 31 of 42

Aztech DSL600E Specifications

General

Brand	Aztech
Model	DSL600E
Category	Network Router
Language	English