ADSL2+ Ethernet USB Combo Router – Easy Start
Upon clicking on the above options, you will come to the Welcome screen. If you are setting up
your router for the first time, please click “Setup Wizard” to setup your DSL router. See
Fig 1-38.
Figure 1-38 : Welcome Screen
Page 32 of 42
If you are connecting your router using USB, do not plug in the USB connector until the
system prompts you to do so (for ADSL2+ Ethernet USB Router). Otherwise, connect the
Ethernet cable before proceeding. Click “Continue” to start the installation process. See
Fig 1-39.
Figure 1-39 : Important Note
To Next Page
Loading...
Need help?
General
