ADSL2+ Ethernet USB Combo Router – Easy Start
5. Click CD-ROM drives option and click Next.
6. At the next prompt, click Next to proceed installation with the indicated driver.
7. You may be prompted with Digital Signature Not Found dialog box during installation.
(This happens when Windows detects your driver has a new version).
8. Click Yes to proceed with the installation.
9. Click Finish when prompted.
10. Proceed to Chapter 5.
4.4 For Windows
®
XP
Proceed with the steps below:
1. Power on your computer to start Windows.
2. Place the Installation CD into your CD-ROM Drive.
3. At the prompt shown below in Fig 1-25, select Install from a list or specific location
(Advanced) option and click Next.
Figure 1-25 : Installation from Location
Page 23 of 42
To Next Page
Loading...
Need help?
General
