www.baldormotion.com
C-10 Mint Keyword Summary MN1943
Keyword Description
MOTORDIRECTION To set or read the electrical direction of the motor.
MOTORFEEDBACKANGLE Reads the instantaneous value of commutation angle for
the motor .
MOTORFEEDBACKOFFSET To set or read the electrical angle at which the absolute
position read from an EnDat, BiSS or SSI encoder is
zero.
MOTORFLUX To set the motor’s magnetic flux level, to allow the drive
to accurately calculate motor torque and compensate for
back-EMF.
MOTORLINEARPOLEPITCH To set or read the distance between north poles on a
linear motor.
MOTORLS To set or read the motor leakage inductance.
MOTORMAGCURRENT To set or read the magnetizing current (I
m
)ofan
induction motor .
MOTORMAGIND To set or read the magnetizing inductance (L
m
)ofan
induction motor .
MOTOROVERLOADAREA Reads the extent of an overload condition.
MOTOROVERLOADMODE To set or read the action taken in the event of a motor
overload condition.
MOTORPEAKCURRENT To set or read the peak current rating of the motor.
MOTORPEAKDURATION To set or read the duration for which peak motor current
can be sustained.
MOTORPOLES To set or read the number of motor poles.
MOTORRATEDCURRENT To set or read the rated current of the motor.
MOTORRATEDFREQ To set or read the rated frequency of an induction motor.
MOTORRATEDSPEEDMMPS To set or read the rated speed of a linear induction motor
in millimeters per second.
MOTORRATEDSPEEDRPM To set or read the rated speed of an induction motor .
MOTORRATEDVOLTS To set or read the rated voltage of an induction motor.
MOTORROTORLEAKAGEIND To set or read the rotor leakage inductance of an
induction motor .
MOTORROTORRES To set or read the rotor resistance of an induction motor .
MOTORRS To set the motor stator resistance.
MOTORSLIP To read the slip of an induction motor.
MOTORSPECNUMBER To return the spec number of the motor.
To Next Page
Loading...
