www.baldormotion.com
Mint Keyword Summary C-11MN1943
Keyword Description
MOTORSTATORLEAKAGEIND To set or read the stator leakage inductance of an
induction motor .
MOTORSTATORRES To set or read the stator resistance of an induction
motor.
MOTORTEMPERATUREMODE To set or read the action taken in the event of the motor
overtemperature trip input becoming active
MOTORTEMPERATURESWITCH To read the state of the motor overtemperature trip input.
MOTORTYPE To read or set the type of motor .
MOVEA To set up a positional move to an absolute position.
MOVEBUFFERFREE To return the number of free spaces in the move buffer
for the specified axis.
MOVEBUFFERLOW To set or return the number of free spaces in the move
buf fer before a move buffer low event is generated.
MOVEBUFFERSIZE To set or return the size of the move buffer allocated on
the specified axis.
MOVER To set up a positional move to a relative position.
NETFLOAT To access a controller’s network data array, storing
values in floating-point format.
NETINTEGER To access a controller’s network data array, storing
values as integers.
NODELIVE To determine if a CAN node on the bus is currently live
or dead.
NODESCAN To scan a specific CAN bus for the presence of a
specific node.
NODETYPE To add or remove a CAN node to/from the CAN network.
Can also be read to determine the node type.
NUMBEROF To return information about the abilities of the controller.
NVFLOAT To read or write a floating-point value in non-volatile
memory.
NVLONG To read or write a long integer value in non-volatile
memory.
NVRAMDEFAULT To clear the contents of non-volatile RAM (NVRAM).
OUT To set or read the state of all the outputs on an output
bank.
OUTPUTACTIVELEVEL To set the active level on the digital outputs.
To Next Page
Loading...
