164
Figure 3: Video device name
5. Finally, click on "Play" .
After a short delay you will see the live image of the camera.
1.18.10 Working with the Hardware Real-Time Controller (HRTC)
Note
Please have a look at the Hardware Real-Time Controller (HRTC) (p. 70) chapter for basic information.
There are several use cases concerning the Hardware Real-Time Controller (HRTC):
• "Using single camera":
– Achieve a defined image frequency (HRTC) (p. 164)
– Delay the external trigger signal (HRTC) (p. 166)
– Creating double acquisitions (HRTC) (p. 167)
– Take two images after one external trigger (HRTC) (p. 167)
– Take two images with different expose times after an external trigger (HRTC) (p. 168)
– Edge controlled triggering (HRTC) (p. 170)
• "Using multiple cameras":
– Delay the expose start of the following camera (HRTC) (p. 171)
1.18.10.1 Achieve a defined image frequency (HRTC)
MATRIX VISION GmbH
To Next Page
Loading...