Bang & Olufsen BeoLink 1703 - Users - Admin; Change Password for Admin User

Set up BeoLink Gateway - Interfaces - Users 40
Interfaces
This menu is for setting up users
an user rights and setting up the
user interfaces generated by the
BeoLink Gateway.
It is possible to congure the
following features :
- Users that can access the system
and restrictions.
- Sources and features of A/V
products.
- Access to IP cameras in the house.
- Resources and macros that appear
in a zone.
- Virtual resources that provide a
friendly way of interacting with
some systems.
- Lists with favourite TV channels
and radio stations.
The resources to be accessed via the user interfaces are congured in this section of the Interfaces page. The user interfaces are: the BeoLink App
running on a mobile devices, overlay menus in the TVs, and the Webpanel accessed from a computer.
Congurations are synchronized in real time towards the Webpanel and the TV overlay menu. The synchronization with the BeoLink App is done
when activating Conguration > Save revision.
Users - admin
The user named ‘admin’ is a user that exists per default and is meant for the technician/installer, who has access for setting-up BeoLink Gateway
and is allowed to access all zones via WEB or a mobile interface.
Change password for admin user
It is possible to change the password only; per default it is ‘admin’.
Press the admin entry in the left column to change password; see illustration above.