Set up BeoLink Gateway - Interfaces - B&O products 44
HDMI matrix support
The BeoLink Gateway supports unconventional source selection commands where source selection is a sequence of more than one command.
This applies when e.g. an Atlona matrix is used for video distribution.
Up to 32 HDMI matrix sources can be selected on the source drop-down menu.
The input format for the matrix controlled sources depends on the TV type and type of remote control as follows:
- Beo4 and Beo5:
- ML TV: Matrix input 00 to 09 and 10 to 32
- NL TV: Matrix input 1 to 9 and 10 to 32
- BeoRemote One:
- Matrix input 1 to 9 and 10 to 16
Note! The mobile applications do not support source selection sequences other than matrix selection.
To Next Page
Loading...