Bang & Olufsen BeoLink 1703 - Page 43

Set up BeoLink Gateway - Interfaces - B&O products 43
- Name: Optional label to show with the source. Max. 5 to 6 characters. Entering such optional label will replace the default source name. It is
recommended to leave this eld empty unless a specic description for this source is required (e.g. manufacturer name of set-top box or DTV
service).
- Dst: Equivalent to the A/V button on Beo4, or the Destination eld for BeoLink commands in macros.
AUTO can be selected to retrieve the default setting for the source type. The setting can be modied if needed.
- Link:
With ML products:
If a link product has local sources, then a source with the same name from the Audio/Video masters are selected using the LINK Modier.
Also necessary for products in OPTION 4. Some BeoLink products do not support the modier.
With NL products:
The LINK modier checkbox should be checked
√
, if the source is a ‘Network source’.
- UI type: Indication to the mobile application on what type of user interface is needed for operating the product. The type that suits the specic
source best should be chosen.
CD cover browsing from BeoMaster 5 requires UI type set to: N.MUSIC.
Favourite lists require: RADIO, N.RADIO, TV pr DTV.
- Favourites list: This makes it possible to select a favourite list dened in the Favourites section.
When all settings are made press the
Add
button and the product will be saved into the list of product sources.
Pressing the button will remove the source from the list.