Bang & Olufsen BeoLink 1703 - Firmware; Logout (Admin); Manual Update; Online Update

Set up BeoLink Gateway - Tools - Firmware and Logout 53
Firmware
This menu is for updating
software.
There are three ways to
update software:
- Manually via computer.
- Online updating via the
Internet.
- Via the ServiceTool.
Manual update
- Press the
Choose file
and
browse to the le on the
computer and open this, by
which it will automatically be
downloaded to the BeoLink
Gateway and it takes effect
immediately.
Online update
- Ensure the router used with the BeoLink Gateway is connected to the Internet.
- Press the
Check for lastes version
button and the latest ofcial SW will be displayed.
- Press the
Start online update
and the displayed SW version will be downloaded to the BeoLink Gateway and it takes effect immediately.
ServiceTool
Connect the BeoLink Gateway to the ServicTool computer and follow instructions in the ServiceTool; page 17.
Logout (admin)
By pressing the menu-point in the Tools drop down menu list with the title Logout (admin), the administrator will be logged out!