Set up BeoLink Gateway - Tools - Log 51
Log
The ‘System Log Menu’ is able to show system
messages concerning the interaction between the
BeoLink Gateway and external devices connected,
such as application errors and critical system errors.
The log menu can be used to:
- Verify the connection to external devices.
Errors will be shown.
- Check of incoming BeoLink Gateway protocol
connections.
The size of the system log is limited, which means
that old messages will be deleted when new
messages appear.
Note: The length of the log is limited to 10.000 lines,
and when full, the oldest will disappear rst.
To Next Page
Loading...