Bang & Olufsen BeoLink 1703 - Revision History; Reloading a Saved Revision

Set up BeoLink Gateway - Configuration - Revision history 57
Revision history
The BeoLink Gateway keeps
a record of the latest ten
conguration revisions.
A new revision can be saved
and marked with relevant
tag information by selecting
Conguration > Save
revision; see page 54.
Autosaved congurations
are listed in the Revision
history and is marked with
the tag: ‘Auto save’.
Reloading a saved revision
To access any of the ten
saved revisions or the auto-save conguration select Conguration > Revision history and choose the saved revision desired.
When selected the le will be copied into the current conguration. It will become active immediately and it will be saved as a new auto-save
conguration.