Barco Coronis Uniti MDMC-12133 - 3. Display Installation; 3.1 Removing the Connector Compartment Cover

3. Display installation
3. DISPLAY INSTALLATION
Prior to installing your Coronis Uniti and connecting all necessary cables, make sure to
have a suitable display controller physically installed in your computer. If you are using
a Barco displa y controller, please consult t he user guide delivered with it to do this.
For a list of compatible dis play controllers, please refer to the latest version of the com-
patibility matrix available on m
y.barco.com (MyBarco > My Support > Healthcare > Com-
patibility Matrices > Barco Systems Compatibility Matrices).
3.1 Removing the connector com partmen t cover
The connector compartment cover should be removed to get access to the connectors.
To remove the connector compartment cover
1. Gently push the two lips on the top of the cover.
2. Pull the top of the cover slightly away from the display and lift the cover upwards.
3. Remove the cover .
K5902079 CORONIS UNITI 21/04/2015
9