4. Daily operation
Left key
Right key Behavior
Enable OSD
Left key
Right key Menu Behavior
No push Push No menu
Cycle SoftGlow
modes between
task light, wall
light, both, none.
Push No push No menu Nothing
Push Push No menu
Cycle viewing
mode between
text and
diagnostic
No Push Push
No push No push Menu
Enter the OSD
menu
4.7 I-Luminate
About I-Luminate
When the display is in power on mode and the OSD menu is not shown, I-Luminate can be activated by
touching the I-luminate/left key.
When touching the I-Luminate key, the display will enter the I-Luminate mode, for approximately 1 minute.
Touch the I-Luminate key again to immediately switch back to normal mode.
4.8 E xtend e d display keypad functions
About extended display keypad functions
The concept of the extended display keypad functions is to present a selection of functions immediately
available to the user without the need to navigate through the OSD Menu.
The extended display keypad functions wil
l only be available when no OSD menu is
visible on the screen.
4.8.1 I-luminate mode
To quickly chan ge the I-luminate m ode
1. While no OSD menu is on the screen, press the I-luminate/Left key to bring up the I-luminate quick
selection menu.
2. Toggle the available I-luminate modes (see "I-Luminate default mode", page 32) by pressing the Right
key.
4.8.2 Viewing mode
To quickly change t he viewing mod e
1. While no OSD menu is on the screen, press the Left key and Right key simultaneously to change the
viewing mode.
2. Toggle the available viewing modes (see "Viewing modes", page 34) by pressing the Left/Right key
simultaneously.
K5902079 CORONIS UNITI 21/04/2015
27
To Next Page
Loading...
