5. Advanced operation
3. Enter the Color Presets submenu.
4. Select one of the available Color Presets and confirm.
5.14 Color t emperature
About color temperature:
It is possible to change the color temperature of your display.
Color temperature can only be changed on your display when color presets is set to
user. Therefore, please refer to "Color presets", page 33 to do this.
To change the color temperature:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Color Definition submenu.
4. Select Color Temperature and confirm.
5. Enter the Color Temperature submenu.
6. Set the Temperature value as desired and confirm.
5.15 Color coordinates
About color coordinates:
It is possible to change the color coordinates of your display.
Color coordinates can only be changed on your display when color
presetsissetto
user. Therefore, please refer to "Color presets", page 33 to do this.
To change the color coordinates:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Color Definition submenu.
4. Select Color Coordinates and confirm.
5. Enter the x and/or y submenu.
6. Set the coordinate value for x and/or y as desired and confirm.
5.16 Viewing m o des
About viewing modes
The Coronis Uniti can be used in two viewing modes:
34
K5902079 CORONIS UNITI 21/04/2015
To Next Page
Loading...
