3. Display installation
3.9 Routing the cables & Reattach the connec tor compartment
cover
To route the cables
1. Route all connected cables through the cable routing channel in the stand of your display.
Tip: The cable straps at the inside of the connector compartment allow you to fix the cables for better
shielding of the cables.
To reattach the connector compartment cover
1. Reattach the connector compartment cover by sliding the cover’s top. You’ll hear a “click” sound of the
cover’s clips when the connector compartment cover is in position.
K5902079 CORONIS UNITI 21/04/2015
17
To Next Page
Loading...
