1. General
1. GENERAL
Purpose of this kit
This kit is designed to upgrade a Barco digital projector with a Barco ICMP (Integrated Cinema Media
Processor), or to replace an installed ICMP of a Barco ICMP supported projector in the field.
Where to use
The ICMP is designed to use with Barco digital projectors which are ICMP supported.
List of Barco ICMP supported projectors:
•DP2KS
•DP2KSx
•DP2KC
•DP2KCx
•DP2KB
•DP2KBx
•DP2KP
•DP4KB
•DP4KBx
•DP4KP
•DP4KL
•DP2KE
• Galaxy 4K
About this document
Read this document before installing your ICMP in the projector. It contains important information con-
cerning installation requirements for the ICMP, such as safety related issues, initial inspection, minimum
version of projector software, etc.
This document can be used as a guideline to upgrade the Barco projector with the ICMP or to replace an
installedICMPinthefield.
The latest version of this document can be downloaded from the Barco website w
ww.barco.com or from
the secured Barco website h
ttps://my.barco.com.
Barco provides a guarantee relating to perfect manufacturing as part of the legally stip-
ulated terms of guarantee. Observing the specification mentioned in this document is
critical for the ICMP performance. Neglecting this can result in loss of warranty.
Overview
•Safety
• Installation requirements
• Initial inspection
1.1 Safety
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards
IEC60950-1, EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards
R5905722 ICMP 09/11/2016
3
To Next Page
Loading...
Need help?
General