1. General
of information technology equipment including electrical business equipment. These safety standards
impose important requirements on the use of safety critical components, materials and insulation, in
order to protect the user or operator against risk of electric shock and energy hazard and having access
to live parts. Safety standards also impose limits to the internal and external temperature rises, radiation
levels, mechanical stability and strength, enclosure construction and protection against the risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the
equipment’s normal operation fails.
User d efinition
Throughout this manual, the term SERVICE PERSONNEL refers to persons having appropriate techni-
cal training and experience necessary to be knowledgeable of potential hazards to which they are ex-
posed (including, but not l imited to HIGH VOLTAGE ELECTRIC and ELECTRONIC CIRCUITRY and
HIGH BRIGHTNESS PROJECTORS) in performing a task, and of measures to minimize the potential
risk to themselves or other persons. The term USER and OPERATOR refers to any person other than
SERVICE PERSONNEL, AUTHORIZED to operate professional projection systems located.
Important s afety instructions
Read this chapter attentively. It contains important information to prevent personal injury while installing
the ICMP in a Barco digital projector. Furthermore, it includes several cautions to prevent damage to the
ICMP. Ensure that you understand and follow all safety guidelin
es, safety instructions and warnings men-
tioned in this chapter before installing the ICMP. After this chapter, additional “warnings” and “cautions”
are given depending on the installation procedure. Read and follow these “warnings” and “cautions” as
well.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Only trained and authorized technicians may install the ICMP.
• InstallandusetheICMPexclusivelyonaBarcodigitalprojectormentionedinthelist“Wheretouse”
(page 3).
• Installation of the ICMP must be done in a dust free area.
• Only use attachments/accessories specified by the manufacturer .
• CAUTION: Troubleshooting must be performed by a trained te
chnician. To reduce the risk of electrical
shock, do not attempt to service this equipment unless you are qualified to do so.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, or the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• FRAGILE: The ICMP is fragile. Handle the ICMP with care at all times.
• Always switch off the projector and unplug the power cord before removing one of the covers, unless
otherwise stated.
• Always wear a wrist band which is connected to the ground while handling the ESD sensitive parts.
• Wear insulating gloves during the execution of the installation and maintenance actions to avoid short-
circuit.
• Switch off the projector and unplug the power cord from the UPS INLET for removal of all power from
the projector (not applicable for DP2K S series).
• Be careful never to drop anything into the ICMP assembly during the procedure. The fall of a tool or a
spare part in the ICMP or in the projector could have catastrophic consequences when you will restart
the system.
• Be careful to always follow strict procedures during maintenance operations (Battery replacement,
assembly replacement).
• Save the original shipping carton and packing material. They will come in handy if you ever have
to ship your equipment. For maximum protection, repack your set as it was originally packed at the
factory.
4
R5905722 ICMP 09/11/2016
To Next Page
Loading...
Need help?
General