3. ICMP installation
CAUTION: It’s strongly recommended to complete the RAID recovery process prior to
starting a show. This to ensure that the content integrity is preserved and that the show
is not interrupted.
3.5 O btaini ng the Barco ICMP certi ficate
Necessary tools
Smartphone (with auto-focus) or control software (e.g. Communicator, Commander or WEB Commander)
Using the CertID label to download the ICMP certificate
1. Scan the QR code (reference 1) on the front face of the ICMP with a smartphone. It’s recommended
to use a smartphone with auto-focus. The QR reader will automatically redirect to the ICMP certificate
download page on the web server.
Note: Instead of downloading the ICMP certificate you can use the CertID number (reference 2), lo-
cated below the QR code, in communication with your KDM supplier. Certifi
ed KDM suppliers
can use this CertID number to retrieve the ICMP certificate directly.
96 92 35 86 40
1
2
Image 3-7
Using control software to obtain the ICMP certificate
1. Use the WEB Commander to download the ICMP certificate from the ICMP main board. For detailed
instructions see user guide of the WEB Commander.
Or,
use the Commander to download the ICMP certificate from the ICMP main board. For detailed instruc-
tions see user guide of the Commander.
Or,
use the Communicator to download the ICMP certificate from the ICMP main board. For detailed
instructions see user guide of the Communicator.
3.6 Removin g a HDD from the ICMP
In case the ICMP has to b e returned to factory (e.g. for repair) the non defective HDDs
should be removed and kept.
How to remove a HDD ?
1. Switch off the projector.
2. Moving the latch towards the left.
R5905722 ICMP 09/11/2016
35
To Next Page
Loading...
Need help?
General