3. ICMP installation
7. Proceed with retrieving the device certifi cate from the ICMP for ordering the correct KDMs to play Dig-
ital Cinema Packages (DCPs). For detailed instructions see user guide of the (WEB) Commander or
Communicator.
Replacing the ICMP in the Card Cage of the projector will result in tamper events (service
door tamper, ins ertion tamper). An authorization to clear the security warning on the
projector, after installation, will be needed. You will find in the installation manuals of
each projector the way to clear the security warnings.
In the ICMP, the content is stored on removable disks that allow fast recovery of this
content if you have to replace the ICMP. S ee chapters "Removing a HDD from the ICMP",
page 35, and "Installing a HDD into the ICMP", page 33 . However, take into account that
the matching KDM file must be ingested into the ICMP to play the cinema content (DCP
file) available on the HDDs.
A n e wly installed ICMP has the factory settings. The ICMP software offers the ability to
import setting parameters from a backup file. For detailed instructions see Communi-
cator user guide.
3.4 Installin g a HDD into the ICMP
This procedure a ssumes that the H DD slot of the ICMP i s empty. If not, see procedure
"Removing a HDD from the ICMP", page 35.
CAUTION: Always use a new empty spare part HDD from Ba rco to replace a malfunction
HDD. Do not use a HDD from another ICMP HDD set.
CAUTION: Always make sure that all HDDs in the ICMP HDD set have the same storage
capacity. See label on top of the HDD to know the storage capacity.
How to install a HDD ?
1. Ensure that the projector is switched off.
2. Prepare the HDD for insertion by moving the la
tch towards the left and push the unlock button to open
the handle.
R5905722 ICMP 09/11/2016
33
To Next Page
Loading...
Need help?
General