32 ImagePRO-II • User’s Guide
4. Menu Orientation
About the Setup Menu
^Äçìí=íÜÉ=pÉíìé=jÉåì
The Setup Menu, shown in the following illustration, is the menu from which you access all
operational menus. To display the Setup Menu, press the SETUP button on the front
panel.
Figure 4-1. Setup Menu
From the Setup Menu, you can control most of the ImagePRO-II’s features. You can also
display Technical Support contact information, restore factory default settings, and check
for available firmware updates. The following sections describe each Setup Menu option in
detail, except for the Code Upgrade feature. For details about that option, refer to
Appendix C, Upgrading Firmware
, on page 167.
Configuring Inputs Using the System Menu
Configuring Outputs Using a Logo or Internal Black
Acquiring an Input Signal Setting up an LED Wall
Creating Custom Formats Using the Tech Support Menu
Creating and Saving Views Restoring Factory Default Settings
About Transition Effects
SETUP
> Input >>
Output >>
In Auto Acquire On
Custom Formats >>
Views >>
Transition >>
System >>
Logo >>
LED Setup >>
Save Snapshot
Tech Support >>
Factory Reset >>
Firmware Upgrade >>
To Next Page
Loading...
