EasyManua.ls Logo

Barco MDSC-8232 - Page 58

Barco MDSC-8232
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
K5902094 (451920611693) /02 MDSC-8232
58
Viewing angle (H, V) 178°
Luminance Maximum: 550 cd/m² (typical), with OSD brightness = 90
Default @ ITU 709: 500 cd/m² stabilized (typical), with OSD brightness = 90
Contrast ratio 1400:1 (typical)
LCD response time (Tr + Tf) Black to White transition time Tr= 11 msec
White to Black transition time Tf= 9 msec
White point Native: Min 4900K, Typical 6500K, Max 9200K
Calibrated: 5600K, 6500K, 7600K, 9300K
Gamma Native, 1.8, 2.2, 2.4, DICOM, Video
Backlight sensor Backlight stabilization
Front sensor N/A
Housing color RAL 9004
Screen protection Anti-reflective tempered glass
Keyboard Capacitive touch keyboard (with enable/disable switch)
Video input signals 1 x 4K-UHD input: 2x DP 1.1 (at 1920x2160 or 2048x2160) genlocked or 1x
DP 1.2 MST
1 x DVI FHD input (upscaled to UHD)
1 x 3G-SDI FHD input (upscaled to UHD)
Video output signals 1 x 3G-SDI loopthrough
1 x DVI FHD output (4K is down-scaled to FHD)
Video formats Display Port 1.2 MST (10 bit) up to 4096x2160 @60Hz (displayed at native
resolution)
Dual stream DP 1.1 (10-bit) up to 2048x2160 x2 @60Hz synchronized
(displayed at native resolution)
3G-SDI (10-bit), in compliance with: SMPTE 425M (Level A), SMPTE 424M,
SMPTE 292M, SMPTE 259M, SMPTE 296M, ITU-R BT.656, ITU-R BT.601
DVI (8bit) up to 1920x1080 @60Hz
Multi-image support No
Remote control USB port for FW download & control protocol
Power source requirements for
external power supply (nominal)
100-240 VAC, 50/60 Hz auto-switch
Power source requirements for
display power input
+24 VDC ±10% / 8 A
Power supply DC output cable
length
2.0 m (6.6 ft)
Power consumption 110 W (typical), 190 W (max)
Cooling Thermo regulated forced cooling
Power management Low power modes:
Stand-by: about 18 W
Power-off: about 1 W
OSD languages English, French, German, Spanish, Italian
Dimensions display (W x H x D) 777 x 472 x 117 mm (30.6 x 18.6 x 4.6 in)
Dimensions power supply (W x
H x D)
223 x 88.5 x 38.6 mm (8.8 x 3.5 x 1.5 in)
Dimensions packaged (W x H x
D)
730 x 560 x 170 mm (28.74 x 22.05 x 6.69 in)
Net weight display 15 kg (33 lbs)
Net weight power supply 1.2 kg (2.65 lbs)
Net weight packaged 21.2 kg (46.8 lbs)
Mounting standard VESA (100 x 100 mm, 200 x 100 mm)
Recommended modalities Endoscopy, Laparoscopy
Certifications IEC 60601-1: 2012 Edition 3.1 (Medical electrical equipment Part 1:
General requirements for basic safety and essential performance)
Important information

Table of Contents