Barco MDSC-8232

K5902094 (451920611693) /02 MDSC-8232
60
White point Native: Min 4900K, Typical 6500K, Max 9200K
Calibrated: 5600K, 6500K, 7600K, 9300K
Gamma Native, 1.8, 2.2, 2.4, DICOM, Video
Backlight sensor Backlight stabilization
Front sensor N/A
Housing color RAL 9004
Screen protection Anti-reflective tempered glass
Keyboard Capacitive touch keyboard (with enable/disable switch)
Video input signals 1 x 4K-UHD input: 2x DP 1.1 (at 1920x2160 or 2048x2160) genlocked or 1x
DP 1.2 MST or 2x 10Gb Ethernet fiber optic
1 x DVI FHD input (upscaled to UHD)
1 x 3G-SDI FHD input (upscaled to UHD)
Video output signals 1 x 3G-SDI loopthrough
1 x DVI FHD output (4K is down-scaled to FHD)
Video formats Display Port 1.2 MST (10 bit) up to 4096x2160 @60Hz (displayed at native
resolution)
Dual stream DP 1.1 (10-bit) up to 2048x2160 x2 @60Hz synchronized
(displayed at native resolution)
3G-SDI (10-bit), in compliance with: SMPTE 425M (Level A), SMPTE 424M,
SMPTE 292M, SMPTE 259M, SMPTE 296M, ITU-R BT.656, ITU-R BT.601
DVI (8bit) up to 1920x1080 @60Hz
Multi-image support No
Remote control FW download & control protocol via optical Ethernet intferface
Power source requirements for
external power supply (nominal)
100-240 VAC, 50/60 Hz auto-switch
Power source requirements for
display power input
+24 VDC ±10% / 9.5 A
Power supply DC output cable
length
2.0 m (6.6 ft)
Power consumption 150 W (typical), 230 W (max)
Cooling Thermo regulated forced cooling
Power management Low power modes:
Stand-by: about 52 W
Power-off: about 1 W
OSD languages English, French, German, Spanish, Italian
Dimensions display (W x H x D) 777 x 472 x 117 mm (30.6 x 18.6 x 4.6 in)
Dimensions power supply (W x
H x D)
223 x 88.5 x 38.6 mm (8.8 x 3.5 x 1.5 in)
Dimensions packaged (W x H x
D)
730 x 560 x 170 mm (28.74 x 22.05 x 6.69 in)
Net weight display 15.5 kg (34.1 lbs)
Net weight power supply 1.2 kg (2.65 lbs)
Net weight packaged 21.7 kg (47.9 lbs)
Mounting standard VESA (100 x 100 mm, 200 x 100 mm)
Recommended modalities Endoscopy, Laparoscopy
Certifications • IEC 60601-1: 2012 Edition 3.1 (Medical electrical equipment – Part 1:
General requirements for basic safety and essential performance)
• EN 60601-1: 2006 +A1:2013 (Medical electrical equipment”. Part 1:
General requirements basic safety and essential performance)
• ANSI/AAMI ES 60601-1: 2005/(R)2012 and A1:2012, C1:2009/(R)2012
and A2:2010/(R)2012 - Med. El. Equip., Part 1: general req. for basic safety
and essential performance.
• CAN/CSA-C22.2 No. 60601-1: 14 Medical Electrical Equipment - Part 1:
General Requirements for Basic Safety and Essential Performance
(Harmonized with Ed. 3.1)
Important information