Bartec MAK TIGER 3003 - Additional Analysis of Tank

Sampling
28
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
8.3.2.2 Additional Analysis of Tank
If an additional analysis is to be performed for the currently taken sample, you
can write this information to the tag.
● From the list, select which additional analysis should be performed on the
sample.
● Press the "Confirm" soft key  to confirm your selection.
You can also make the selection directly by touching the corresponding num-
ber key(s).
Only one additional analysis can be selected for the sample at a time.
Information
Explanatory notes
1
Normal sample
Normal sample
2
Celgetal
Cell count
3
Remstoff
Inhibitors
4
Coligetal
Coliform germs
5
Kiemgetal
Bacterial count
6
Vriespunt
Freezing point
7
Matiére Grasse-Azotée
Fat and nitrogen content
8
Lactose
Lactose
9
Acides Gras Libres
Free fatty acids
10
Ureum
Urea
11
Ph
PH value
12
Filtratie
Filtration
13
Onverzadigte cetzuren
Unsaturated fatty acids
14
Thermoresistant bacteria
Thermoresistant bacteria
15
Butyriques
Butyric acid
16
Biotin
Vitamin B
17
Iodure
Iodide
18
Celgetal + Remstoff
Cell count + inhibitors
19
Celgetal + Coligetal
Cell count + coliform germs
20
Celgetal + Germes
Cell count + germ count
21
Celgetal + Cryoscopie
Cell count + Freezing point depression
22
Celgetal + MG/MP
Cell count + fat and nitrogen content
23
Inhibiteurs + Coligetal
Inhibitors + Coliform germs
24
Inhibiteurs + Germes
Inhibitors + bacterial count
25
Germes + Coligetal
Germ count + Coliform germs
26
MG/MP + Lactose
Fat and nitrogen content + lactose
27
MG/MP + Ureum
Fat and nitrogen content + urea
28
Cellules + MG/MP + Ureum
Cell count + fat and nitrogen content + urea