Bartec MAK TIGER 3003 - Manual Sample

Sampling
31
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
8.3.2.4 Manual sample
You can fill a sample manually in case of a malfunction of the automatic sam-
pling.
● Then place the filled sample bottle in the reading position of the tag reader.
● Select the appropriate reason for manual sampling from the list under
"Manual Sample".
Information
Explanatory notes
1
Default automatic sampling
Automatic normal sample
2
Intake quantity too small
Intake quantity is too small for automatic sampling
3
Sampler is not working
Sampler defective
4
Broken filling needle
Broken filling needle
5
Other event...
Other event...