Main Menu
69
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
14 Main Menu
When the home screen is displayed, you can use the soft key
MENU to call up the main menu. It contains submenus which are used to con-
figure the equipment and to access various functions.
The configuration menus and service menu are write-protected by password.
Only the menus and functions to which you have access without entering a
password or after entering the driver password are described here.
You can open the submenus in the "Configuration" menu without entering a
password, but you cannot make any changes.
Calling up the main menu
Touch the soft key MENU . The submenus of the main menu are displayed.
Open menu
1. Using the selector keys and , select the submenu that you want to
open. The submenu selected is highlighted by a black bar.
2. Touch the soft key MENU . The menu opens.
You can also open the menu you require simply by keying in the number of
the menu.
If the submenu also contains submenus, proceed in the same way to open the
submenu you require.
To Next Page
Loading...
Need help?
General
