Main Menu
70
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
14.1 Data transfer
Data transfer to the dairy is launched in this menu.
All as yet not transferred tour data are transferred to the designated server.
The data are processed there in the format specified for the dairy and made
available for the dairy to collect.
The flashing disk symbol in the bottom left corner of the display will disappear
when the data have been transferred.
The data transfer is automatically started at the end of the tour, provided this
is configured accordingly.
14.2 Long-term memory
Collection and tour data from the past three months are stored in the long-
term memory. You can view both tour data and single data.
You can also view the long-term memory in the tour menu (see section 12.10).
To Next Page
Loading...
