Raw milk separation
43
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
Confirm the assignment of the
tank segment qualities with CONFIRM .
If no quality is applied by default or from the quantity memory, the quality of the
milk to be collected must be entered.
If automatic compartment selection is configured, the tank segment config-
ured for this quality is automatically selected after the quality has been entered.
If the configuration is set to manual compartment selection, a segment is pro-
posed according to the quality entered. You can select another segment instead
of the proposed one.
The intake of milk into a segment whose quality differs from the quality of the
current intake leads to a corresponding downgrading if this segment already
contains milk.
To Next Page
Loading...
