Contents
3
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
Our “Terms & Conditions of Sale and Delivery” shall apply as a general
principle.
These shall be available to the operator upon entering into the contract
at the latest.
Claims may not be brought under the warranty or for liability in case of
personal injury and property damage where attributable to one or more
of the following root causes:
► Improper use of the product.
► Incorrect assembly, commissioning, operation and mainte-
nance of the product.
► Failure to follow the instructions in the manual regarding
transport, storage, assembly, commissioning, operation and
maintenance.
► Unauthorised structural alterations to the product.
► Inadequate monitoring and inspection of parts which are sub-
ject to wear.
► Incorrectly executed repairs.
► Disasters caused by foreign objects and extraneous forces be-
yond all control.
► No liability shall be accepted for consequential damage as a
general rule.
We BARTEC BENKE GmbH, Schulstraße 30, D-94239 Gotteszell,
hereby declare, that this product is in compliance with the essential re-
quirements of the relevant EU-directives.
The EU-Declaration of conformity for this product can be obtained from
BARTEC BENKE GmbH, Schulstraße 30, D-94239 Gotteszell,
info@bartec.com.
To Next Page
Loading...
