Tour menu
55
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
Target segment
ā Enter the number of the target segment into which the milk is to be
pumped.
Raw milk separation
If raw milk separation is active, the system checks whether the quality level of
the milk in the target segment matches the quality level in the source segment.
If this is not the case, the system issues a corresponding message. Repeat
the segment selection if necessary.
The target segment is in-
tended for milk of a higher
quality than the milk from the
source segment. The pump-
over leads to a downgrading
of the quality level of the target
segment.
The target segment is in-
tended for milk of a lower qual-
ity than the milk from the
source segment. In this case,
the pumped-over milk is
downgraded to the quality of
the target segment.
To Next Page
Loading...
