9424200996 48-23
BE1-11m BESTlogic™Plus
Protecting a BESTlogic™Plus File
Objects in a logic diagram can be locked so that when the logic document is protected these objects
cannot be changed. Locking and protecting is useful when sending logic files to other personnel to be
modified. The locked object(s) cannot be changed. To view the lock status of the object(s), select Show
Lock Status from the Protection drop-down menu. To lock object(s), use the mouse to select object(s) to
be locked. Right click on the selected object(s) and select Lock Object(s). The gold colored padlock next
to the object(s) will change from an open to a locked state. To protect a logic document, select Protect
Logic Document from the Protection drop-down button. A password is optional.
Uploading a BESTlogic™Plus File
To upload a BESTlogicPlus file to the BE1-11m, you must first open the file through BESTCOMSPlus or
create the file using BESTCOMSPlus. Then pull down the Communication menu and select Upload Logic
to Device.
Downloading a BESTlogic™Plus File
To download a BESTlogicPlus file from the BE1-11m, you must pull down the Communication menu and
select Download Settings and Logic from Device. If the logic in your BESTCOMSPlus has changed, a
dialog box will open asking you if want to save the current logic changes. You can choose Yes or No.
After you have taken the required action to save or not save the current logic, the downloading is
executed.
Printing a BESTlogic™Plus File
To view a preview of the printout, click on the Print Preview icon located on the BESTlogicPlus
Programmable Logic toolbar. If you wish to print, select the printer icon in the upper left corner of the Print
Preview screen.
You can skip the print preview and go directly to print by clicking on the Printer icon on the BESTlogicPlus
Programmable Logic toolbar. A dialog box, Select Views to Print opens allowing you to check which views
you would like to print. Next, the Print dialog box opens with the typical Windows choice to setup the
properties of printer. Execute this command, as necessary, and then select Print.
A Page Setup icon is also provided on the BESTlogicPlus Programmable Logic toolbar allowing you to
select Paper Size, Paper Source, Orientation, and Margins.
Clearing the On-Screen Logic Diagram
Click the Clear button to clear the on-screen logic diagram on all logic pages and start over.
BESTlogic™Plus Examples
Example 1 - OR Gate Connections
Figure 48-12 illustrates a typical OR gate connection. In this example, OUT5 will become active when
either the Major Alarm OR the Minor Alarm OR both is true.
Figure 48-12. Example 1 - OR Gate Connections
Example 2 - Inverse Overcurrent Logic Diagram
Figure 48-13 illustrates a typical logic diagram of two inverse overcurrent elements set up to trip outputs
and trigger fault reports. The 51-1 function is blocked when IN1 is true. The 51-1 function is blocked when
To Next Page
Loading...
