Commissioning documents
Also refer to the Terms and Conditions of Sale of your
engine (see DOC723-05-COM, index B).
Read carefully!
To benet from the terms of our warranty, the engine user
must have commissioning and F1 and F2 technical
inspections described in this document carried out by
personnel from the S. I. Moteurs Baudouin approved
network.
Please refer to chapters D and E for the documents on the
Servicing and Follow-up of your engine.
b Once commissioning has been effectively carried out, the
personnel of the S. I. Moteurs Baudouin network will send
the following to the head ofce:
v The installation description sheet (see DT 21.G01-
Commissioning request).
v The sea test sheet (see sheet E300 - Sea test sheet).
v The auxiliary generator test sheet (see sheet E300 -
Auxiliary generator test sheet).
v The generator test sheet (see sheet E301 - Generator
test sheet).
b After every F1 or F2 inspection, the Distributor or Agent
from the S. I. Moteurs Baudouin network sends the following
to the head ofce:
v The F1 sheet relating to the rst inspection (see sheet
D200 - F1 maintenance operations).
v The F2 sheet relating to the second inspection (see sheet
D300 - F2 maintenance operations).
IMPORTANT
Warranty applications can only be made by the personnel
of the approved network and will only be accepted under
the following conditions:
b Receipt of the commissioning documents at our head
ofce:
v Installation description sheet.
v Sea or generator test sheet.
b The duly completed online warranty request.
b The parts used for maintenance, servicing or repairs
must be original S. I. Moteurs Baudouin parts.
b The approved network representative must ensure that
maintenance operations are carried out in accordance with
the recommendations set out in this manual.
b The hour meter must be working properly (consult the
commissioning date).
In the event of a dispute concerning maintenance, the
user will provide all invoices for the corresponding
work.
Note: all maintenance supplies will be paid for by the
customer, including costs relating to F1 and F2 inspections.
DT 21.G01