If required, the user will provide invoices relating
to any engine maintenance work carried out.
servicing frequency
(when the 1
st
servicing date
is reached)
PR
catalogue
Note (see
page 2/2)
Comments
1 year or 2,000hrs
3 years or 4,000 hrs
5 years or 8,000 hrs
10 years or 16,000 hrs
15 years or 32,000 hrs
R1
Injector servicing 05 2
Checking rocker arm play 01
Cleaning the vent pipe lter 01
Checking the injection tubes are fastened 05
Checking the turbocharger
- axial and radial play
- compressor side cleaning
10 2, 3
R2
Replacing the injector nozzles 05 2, 3
Checking thermostats 03 Change if
necessary
Cleaning the air coolers, air and water side 03/10
Replacing the vent pipe cartridge 01 4
Checking the tightness of the engine connections
Balancing the injection pump ow rates 05 2, 3
Preventive belt replacement
Dry air lter replacement 08
Replace the blow-by lter cartridges 01
Coolant replacement
Checking the safety tripping thresholds
R3
Cylinder head servicing:
- Check the condition of the cylinder head seating
to the right of the cylinder head gasket.
- Rectify if required.
- Check the seating, guides, valves, springs,
rotocaps, and jackets. Replace if required. Leak
test.
01 3
Cleaning the inlet pipes. 08 3
Servicing the fresh water pump 03 5
Cleaning the engine oil cooler 04
Checking all hoses 03/04/05
Checking the condition of injection tubes 05
Replacement of thermostatic valves 03
To Next Page
Loading...