Need help?Do you have a question about the Baumer VCXG .I and is the answer not in the manual?
General| Brand | Baumer |
|---|---|
| Model | VCXG .I |
| Category | Digital Camera |
| Language | English |
Contact details for technical and application support.
Details the camera's purpose for capturing and transferring images.
Explains the meaning of 'Notice' and 'Caution' safety symbols.
Guidelines for camera transport, storage, disposal, and warranty.
Advises on heat dissipation to prevent camera damage.
Precautionary measures for devices sensitive to static electricity.
Informs about potential radio interference from Class A devices.
Details features like image quality, transfer speed, and standards for VCXG.
Details features like image quality, transfer speed, and standards for VCXU.
Lists compliance with CE and RoHS directives.
Lists VCXG camera types, sensor size, resolution, and frame rates.
Lists VCXG.I/.I.XT camera types, sensor size, resolution, frame rates.
Lists VCXU camera types, sensor size, resolution, and frame rates.
Specifies operating temperature, storage temperature, and humidity limits.
Provides guidance on heat dissipation for camera operation.
Instructions for properly mounting a lens to the camera.
Explains IP65 and IP67 protection ratings for specific models.
Procedure for replacing the filter in color cameras.
Instructions for cleaning the camera's filter/cover glass and housing.
Details standards and parameters for vibration, shock, and bump tests.
Pin assignments and LED signaling for VCXG cameras.
Pin assignments and LED signaling for VCXG.I/.XT cameras.
Pin assignments and LED signaling for VCXU cameras.
Details spectral sensitivity and shutter modes for camera sensors.
Provides accuracy data for sensor positioning.
Explains different acquisition modes and timing parameters.
Describes Global Reset shutter mode based on trigger mode.
Describes Rolling Shutter mode based on trigger mode.
Sensor position accuracy specifications for VCXG models.
Sensor position accuracy for VCXG.I/.I.XT models.
Sensor position accuracy specifications for VCXU models.
Details the continuous acquisition mode and its timing.
Describes capturing a single frame after AcquisitionStart.
Details capturing a predefined number of frames.
Explains defining a desired frame rate in continuous mode.
Explains image acquisition triggered by external events.
Timings for VCXG in Trigger Mode and Freerun Mode.
Timings for VCXU in Trigger Mode and Freerun Mode.
Explains the EventLost signal.
Signals camera's readiness to process incoming trigger signals.
Indicates when triggers are skipped due to camera timing.
Details the Baumer Generic Application Programming Interface.
Lists compatible third-party software for camera operation.
Covers image acquisition parameters like format and pixel types.
Describes color processing modules and white balance features.
Details user-specific and automatic white balance adjustments.
Explains analog controls like offset, black level, and gain.
Information on identifying and correcting defective pixels.
Covers digital I/Os, trigger, debouncer, and timing signals.
Defines RAW, Bayer, Mono, and RGB pixel formats.
Lists available pixel formats for VCXG / .I/.I.XT models.
Lists available pixel formats for VCXU models.
Defines exposure time ranges for VCXG / .I/.I.XT models.
Defines exposure time ranges for VCXU models.
Indicates FPNC support for VCXG / .I/.I.XT models.
Indicates FPNC support for VCXU models.
Explains the use of Look-Up-Tables for image adjustments.
Describes gamma correction for compensating light perception nonlinearity.
Specifies ROI parameters like offset, width, and height.
Details monochrome binning types and their output.
Explains color binning and calculated pixel formats.
Facilitates adjusting color gain correction factors.
Balances color spectrums to a single white point.
Automates white balance adjustment once per second.
Specifies black level ranges for VCXG / .I/.I.XT cameras.
Specifies black level ranges for VCXU cameras.
Lists gain ranges for VCXG / .I/.I.XT models.
Lists gain ranges for VCXU models.
Defines defect pixels and their appearance in images.
Explains the algorithm for correcting defect pixels.
Procedure to add user-defined defect pixel coordinates.
Details digital input and output configurations.
Explains trigger signals for synchronizing camera operations.
Lists and describes various trigger sources.
Explains debouncing for filtering interfering signals.
Describes the ExposureActive signal managed by sensor exposure.
Details timers for advanced control of internal camera signals.
Explains counting events using the counter feature.
Describes sequencer sets combining camera features and parameters.
Explains how to configure sequencer settings.
Lists and describes sequencer configuration commands.
Resets the camera to its default state after parameterization.
Details managing and saving camera settings in user sets.
Lists parameters configurable for VCXG / .I/.I.XT user sets.
Lists parameters configurable for VCXU user sets.
Lists features available in chunk data packet Rel. 1.
Lists features available in chunk data packet Rel. 2.
Explains camera acquisition start, stop, and abort processes.
Describes the interface start/stop behavior and data transmission.
Provides Gigabit Ethernet-specific device information.
Explains packet sizes and MTU for network communication.
Details Inter Packet Gap for optimal image transfer.
Explains transmission delay for multi-camera operation.
Describes multicasting for sending data to multiple destinations.
Covers persistent IP and DHCP configuration methods.
Explains mechanisms for resending lost data packets.
Details the asynchronous message channel for event signaling.
Enables simultaneous triggering for multiple cameras via Ethernet.
Provides USB descriptor information for VCXU devices.
Details the asynchronous message channel for USB 3.0 Vision.
Describes chunk data packets for VCXU camera images.
To Next Page
