Baumer VCXG .I - Sequencer Configuration Process; Sequencer Command Reference

99
7.7.2 Sequencerconguration
In order to avoid overwriting current camera settings while conguring a sequencer, the
camera needs to be set to the sequencer conguration mode.
Once the camera is set to the sequencer conguration mode, the individual sequencer
sets can be selected via the SequencerSetSelector, congured and saved by executing
SequencerSetSave.
Starting the congured sequence requires to switch the sequencer conguration mode off
and to enable the sequencer mode.
7.7.3 Sequencercommandoverview
Feature Values Description
SequencerMode
On/Off
Enables / disables the se-
quencer mechanism
To use this feature, the Se-
quencerCongurationMode
must be off.
SequencerCongurationMode
On/Off
Enables / disables the se-
quencer conguration mode
Here the sequencer cong-
uration can take place but
there is no image acquisi-
tion.
To use this feature, the Se-
quencerMode must be off.
SequencerFeatureSelector
ExposureTime
Gain (All)
OffsetX
OffsetY
Width
Height
UserOutputValueAll
UserOutputValue
CounterEventSource
CounterEventActivation
CounterResetSource
CounterResetActivation
CounterDuration
TriggerMode
Selects the camera fea-
tures that are controlled by
the Sequencer.