Baumer VCXG .I - VCXU User Set Parameters

102
7.9.2 VCXU
Parameter
AcquisitionFrameCount ExposureMode ReverseY
AcquisitionFrameRate ExposureTime SequencerMode (Rel. 2)
AcquisitionFrameRate-
Enable
FixedPatternNoise-
Correction
SequencerSetNext (Rel. 2)
AcquisitionMode FrameCounter SequencerSetStart (Rel. 2)
BinningHorizontal Gain SequencerTrigger-
Activation (Rel. 2)
BinningHorizontalMode Gamma SequencerTrigger-
Source (Rel. 2)
BlackLevel Height TestPattern
ChunkEnable LUTEnable TimerDelay
ChunkModeActive LUTValue TimerDuration
CounterDuration LineDebouncerHigh-Time-
Abs
TimerTriggerActivation
CounterEventActivation LineDebouncerLow-
TimeAbs
TimerTriggerSource
CounterEventSource LineInverter TriggerActivation
CounterResetActivation LineSource TriggerDelay
CounterResetSource OffsetX TriggerMode
DefectPixelCorrection OffsetY TriggerSource
DeviceLinkThroughputLimit PixelFormat UserOutputValue
DeviceTemperatureStatus-
Transition
ReadoutMode UserOutputValueAll
EventNotication ReverseX Width
7.10 Factory Settings
The factory settings are stored in "user set 0" which is the default user set. This is the only
user set, that is not editable.