28
4.6 Cleaning
Filter/Coverglass
Notice
The sensor is mounted dust-proof. Remove of the cover glass for cleaning is not neces-
sary.
Avoid cleaning the cover glass of the sensor if possible. To prevent dust, follow the in-
structions under "Install lens".
If you must clean it, use compressed air or a soft, lint free cloth dampened with a small
quantity of pure alcohol.
Housing
Caution!
volatile
solvents
Volatile solvents for cleaning.
Volatile solvents damage the surface of the camera.
Never use volatile solvents (benzine, thinner) for cleaning!
To clean the surface of the camera housing, use a soft, dry cloth. To remove persistent
stains, use a soft cloth dampened with a small quantity of neutral detergent, then wipe dry.
To Next Page
Loading...
