Bausch OccluSense - PREPARATION AND INSTALLATION; Install the OccluSense-iPad-App

PREPARATION
8 Installation of the OccluSense
®
-iPad-App
Before using the OccluSense
®
-System for the first time, install the OccluSense
®
-iPad-
App on the iPad (
www.occlusense.com/install).
Before initial operation of the OccluSense
®
-System or after reset to factory default, a
network configuration of the handheld and the associated pairing with an iPad is required.
The procedure is described below.
NOTE
The handheld comes with uncharged batteries. The rechargeble batteries must •
be charged before first use (see chapter 8.1).
The OccluSense
®
handheld is designed for use with three AAA NiMH batteries •
only (included). The handheld can also be used with other AAA NiMH batteries
than those supplied. These AAA NiMH batteries must have a minimum capacity
of 1000mAh.
Perform a visual inspection for external damages. •
Only use the handheld unit and charging station if there are no external dama-•
ges.
17