8.1 Battery Charging
2. Insert the battery compartment cover
and tighten the screws.
1. Loosen the screws of the battery
compartment lid with the screwdriver
supplied, remove the battery compart-
ment cover and insert the supplied NiMH
batteries into the battery compartment.
4. Insert the handheld into the charging
station as shown.
3. Connect the plug-in power supply unit
to the supply voltage. (Rated Voltage:
100-240V, Rated Current: 160-80mA)
CAUTION
Batteries inserted inversely can reach high temperatures and damage the de-•
vice.
18
To Next Page
Loading...