CAMP/MG208/20-0006 AK 98 Independent Home Dialysis System 15
6. Press the flashing Fluid bypass button. Wait for the dialysate to
completely wet all the fibers. Roll the dialyzer between your
hands to help chase the bubbles.
7. Press the flashing Blood pump button. Turn dialyzer blue end up.
8. Blood pump stops after first flush. When ready for second flush, start
the blood pump.
9. When blood pump stops, check that the venous line is correctly
placed in the priming detector and press Confirm to continue.
Extra priming: If extra priming is necessary, continue priming by
selecting EXTRA PRIMING and then the flashing Blood pump button.
Priming the dialysis circuit – cont’d
To Next Page
Loading...
Need help?
General
