Baylis RFP-100A - Unpackaging and Repackaging; Unpackaging; Repackaging

To Next Page

To Previous Page

SECTION 4: UNPACKAGING AND REPACKAGING

4.1. UNPACKAGING

The Generator’s shipping carton contains all of the components identified below. Unpack the

Generator and accessories carefully and visually inspect the front panel, chassis, or cover for

damage. If any physical damage is found, DO NOT USE THE GENERATOR. CONTACT Baylis

Medical Company for a replacement. Notify the carrier immediately if the shipment carton is

damaged. Verify that the following items are received:

1 Generator

1 User’s Manual

1 Hospital Grade Power Cord

Read the Directions for Use in Section 7 of this manual very carefully and thoroughly. If there are

any discrepancies or concerns, notify Baylis Medical Company. Store the shipping carton in a

safe place for future use.

The Generator may be placed on a mounting cart or on any sturdy table or platform rated to hold

at least 20 lbs. Do not obstruct the vents underneath and at the rear of the Generator.

WARNING: The Generator should not be used adjacent to or stacked with other equipment. If

the Generator must be operated adjacent to or stacked with other equipment, the Generator should

be observed to verify normal operation in that configuration.

Separately cleared accessory medical devices compatible with the Generator include BMC

connector cables such as (but not limited to) the RFX-BAY-TS, RFX-BAY-TS-12-SU or RFX-

BAY-OTW-10-SU cables, an optional DuoMode

Cable (RFX-BAY-DUO-100A), a

commercially available return (dispersive) electrode that meets or exceeds IEC 60601-2-2:2017

and an optional accessory footswitch (RFA-FS). These devices are packaged separately.

4.2. REPACKAGING

If it is necessary to repack and ship the Generator, use the original shipping carton and packing

materials to ensure that no breakage occurs. Disconnect all the cables and accessories and place

them into the locations in the carton that are reserved for these components. Do not attempt to

forcefully fit all the components into the carton.